PCD Inserts Saw Blade for Aluminum Copper and Artificial Marble

Short Description:

The aluminum PCD blades adopts mechanical standardization flow operation, visual system for online inspection, dynamic balance residual unbalance ≤3mg, to ensure the uniformity of product quality. The careful processing and inspection of each blade and each insert is only for the best cutting effect.


  • Model: PC-YS250
  • Diameter: 23-5/8 Inch ( 600 mm )
  • Inner hole: 30 mm
  • Thickness: 4.8 mm
  • Number of Inserts: 144
  • Product Detail

    Product Tags

    Description

    1. The polycrystalline diamond PCD insert has super high hardness and super wear resistance, low friction coefficient, high thermal conductivity, low expansion coefficient, high elastic modulus, which is more than 20 times the lifespan of conventional cemented carbide insert, and has good thermal conductivity. No chip sticking, no clogging, faster product cutting speed, no chipping, higher product surface finish, and gradually replacing carbide saw blades. At the same time, the high precision of the saw blade and the design of the silencing line can significantly reduce noise.

    2. High-quality alloy steel (75Cr1/SKS51) with high heat resistance and reasonable blade angle design allows the heat to dissipate faster with the cutting chips, supporting long-time continuous cutting, and the long lifespan of the PCD insert avoids frequent replacement, which is industrial good helper for batch processing.

    3. The product is suitable for cutting aluminum profiles, aluminum rods, copper rods, aluminum-plastic panels, cultured marble, aluminum doors and windows, and cultured marble. The cutting surface is smooth, without burrs, and can be assembled directly without incision grinding.

    Parameter

    Product Code Diameter Thickness
    (mm)
    Inner Hole
    (mm)
    Number of Inserts Insert Type
    inch mm
    PC-YS077 14'' 355 3 25.4 80 TR
    PC-YS078 355 3 25.4 100
    PC-YS079 355 3 25.4 120
    PC-YS080 16'' 405 3.2 25.4 80
    PC-YS081 405 3.2 25.4 100
    PC-YS082 405 3.2 25.4 120
    PC-YS080 17-5/8'' 450 4 30 120
    PC-YS100 19-5/8'' 500 4 30 120
    PC-YS110 500 4.4 30 120
    PC-YS125 500 4.4 30 144
    PC-YS150 21-5/8'' 550 4.4 30 132
    PC-YS180 550 4.8 30 144
    PC-YS200 23-5/8'' 600 4.6 30 132
    PC-YS250 600 4.8 30 144

    Precautions for use

    1. The pcd saw blade is suitable for cutting in dry environment.Non-ferrous metal bars can also be cut in the environment of cutting fluid, the cutting effect is sharper, and the service lifespan.

    2. The rotation direction of the pcd cutting blade is fixed. Please keep the rotation direction of the equipment consistent with the rotation mark direction of the cutting blade during installation. If the direction is opposite, the cutting process cannot be performed, and the saw blade will be damaged in severe cases.

    3. During the cutting process, it is strictly forbidden to directly touch the saw blade with hands and body.

    Inserts Shape

    The choice of PCD saw blade is related to the characteristics and total thickness of the processed material, and the speed of the equipment. A reasonable choice of saw blade will have better cutting effect and longer lifespan.

    pcd saw blade for marble
    polycrystalline diamond pcd tools (3)
    polycrystalline diamond pcd tools (2)
    pcd cutting inserts (2)
    pcd cutting inserts (3)
    pcd cutting inserts
    pcd diamond cutting tools (4)

  • Previous:
  • Next: