Gang Saw Machine for Marble Stone Cutting Block Cutter

Short Description:

According to different processing conditions, we have different solutions for you to choose from. You can also communicate with us about the specific cutting situation, and the engineer will provide you with solution assistance.


  • Item No.: GU-GM AAA
  • Material of steel blank: 75Ni8 / SKS51 / 75Cr1 / 65Mn
  • Blade Length: 3100mm
  • Blade Width: 1800mm
  • Blade Thickness: 1.75/2.0/2.5/3.0/3.5/4
  • Segment Height: 8 / 10 mm
  • Segment Length: 20 / 30/20 mm
  • Segment Thickness: 1.75/2.0/2.5/3.0/3.5/4 mm
  • Segment Number (pcs/blade) : 20/26
  • Product Detail

    Product Tags

    Description

    1. It is suitable for the mixed cutting of most natural marble. For different marble stones, it has a balanced performance in sharpness and lifespan.

    2. When you encounter new types of stone, this series is a good choice. It is suitable for all types of frame saw equipment, and can meet the general cutting of high-speed gang saw and low-speed gang saw.

    Stones That Can be Processed by the Gang Saw

    We have rich experience of various gang saws cutting. Leafun gang saw can process Onyx / Porphyry / Sandstone / Slate / Tuff / Basalt / Tavertine / Marble / Limestone etc.

    Types of stone that can be processed by the gang saw

    Parameter

    Material of Steel Blank Gang Saw Blade Specification Segment Diamension Segment Number
    Length (mm) Width (mm) Thickness (mm) Length (mm) Thickness (mm) Height (mm) (pcs / blade)
    75Ni8,
    SKS51,
    75Cr1,
    65Mn
    2200 1800 1.75 / 2.0 / 2.5 / 3.0 / 3.5 / 4 20,
    30 / 20
    2.5 / 3,
    3 / 3.5,
    3.5 / 4,
    4 / 4.5,
    4.5 / 5,
    5 / 5.5
    8 / 10 12 / 16
    2500 1.75 / 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 14 / 18
    2700 1.75 / 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 18 / 22
    3000 1.75 / 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 20 / 24
    3100 1.75 / 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 20 / 26
    3500 1.75 / 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 24 / 28
    3950 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 28 / 32
    4000 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 28 / 32
    4100 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 28 / 34
    4350 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 32 / 36
    4400 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 32 / 36
    4450 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 32 / 36
    4500 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 34 / 38
    4600 2.0 / 2.5 / 3.0 / 3.5 / 4 8 / 10 36 / 40

    Production Progress Introduction of Gang Saws

    The production steps of the gang saw are as follows

    1. Granulation

    2. Reduction

    3. Stress Adustment

    4. Vacuum Sintering

    5. Segment Welding

    6. Quality Control

    How gang saws are produced

    Precautions for use

    1.The PH value may change while the cooling fluid takes away the dust. When the PH value is greater than 8.5 or less than 6, it will cause corrosion of the gang saw, which will affect the cutting quality of the product and the lifespan of the gang saw, depending on the pH of the waste liquid discharged from cutting. We recommend choosing gang saw steel blank with different corrosion resistance and improving the cutting environment.

    2. Before sawing, check the sharpness of the diamond  segment of the gang saw. The segment without sharp needs to use a fixed cement block or fixed refractory brick to sharpen. Start sawing and adjust it to a lower falling or rising speed. With the progress of cutting, adjust the cutting speed according to the actual cutting conditions.


  • Previous:
  • Next: