1 Inch CNC Thin Wall Diamond Hole Drill Bit Drilling Round Holes in Ceramic

Short Description:

CNC thin-walled core drill bits can be used to process alumina ceramics, zirconia ceramics, silicon nitride ceramics, silicon carbide ceramics, boron oxide ceramics, aluminum nitride ceramics, and silestone for decoration.


  • Model: CNC-CW011
  • Diameter: 25mm ( 1 inch)
  • Segment Height: 8 mm
  • Segment Thickness: 1.8mm
  • Working Length: 3 inch / 4 inch
  • Use: Wet use
  • Product Detail

    Product Tags

    Description

    1. CNC thin-walled core drill bits can be used to process alumina ceramics, zirconia ceramics, silicon nitride ceramics, silicon carbide ceramics, boron oxide ceramics, aluminum nitride ceramics, and silestone for decoration.

    2. The CNC thin-walled core bit drill pipe adopts numerically controlled high-precision production technology, and the tube body has good concentricity. The diamond segment adopts a thin-walled crown shape. After trimming and sharpen, the product accuracy can be controlled within ±0.05mm.

    Parameter

    Product Code Diameter Thickness
    (mm)
    Height
    (mm)
    Lenght
     (inch)
    Thread
    (inch) (mm)
    CNC-CW011 1       25 1.8 8 3'' / 4'' 1/2 Gas
    CNC-CW017 1-1/8" 28 1.8 8 3'' / 4''
    CNC-CW023 1-1/4" 32 1.8 8 3'' / 4''
    CNC-CW030 1-3/8" 35 1.8 8 3'' / 4''
    CNC-CW055 1-1/2" 38 1.8 8 3'' / 4''
    CNC-CW080 1-5/8" 40 1.8 8 3'' / 4''
    CNC-CW106 1-3/4" 45 1.8 8 3'' / 4''
    CNC-CW131 2" 50 1.8 8 3'' / 4''

    Precautions for use

    1. In the first drilling experiment, adjust the lower drilling speed, and then increase the drilling speed when normal operation is checked, and reduce the drilling speed when the drilling is about to be completed. After extracting the experimental data for analysis, adjust the automatic program settings, and then proceed batch drilling operations.

    2. Before each use of the CNC thin-wall core drill, check the working height of the diamond segment. If the working height is less than 1mm, please replace it in time to avoid damage to the processed materials and equipment.

    CNC thin-walled core drill bits can be used to process alumina ceramics, zirconia ceramics, silicon nitride ceramics, silicon carbide ceramics, boron oxide ceramics, aluminum nitride ceramics, and silestone for decoration.

  • Previous:
  • Next: